PRINT SPECIFICATIONS 1 YEAR BEST ACCURACY SPECIFICATIONS
FUNCTION
Voltage DC
Range : ±0 to 1020V
Best Resolution : 0.1uV
Best 1 Year Accuracy : ±5ppm of setting
output to 10kV
Click here for details
Current DC
Range : ±0 to 20Amps
Best Resolution : 100pA
Best 1 Year Accuracy : ±20ppm of setting
available to extend output to 100A
Click here for details
DC Resistance
Range : 0 to 1GOhm
Best 1 Year Accuracy : ±8ppm of setting
Passive decade resistors
Voltage AC
Range : 0 to 1020V
Best Resolution : 1uV
Frequency Range (Sine) : 10Hz to 100KHz
Best 1 Year Accuracy : ±0.01% of setting
output to 5kV
Click here for details
Current AC
Range : 0 to 20A
Best Resolution : 1nA
Frequency Range (Sine) : 10Hz to 10KHz
Best 1 Year Accuracy : ±0.03% of setting
available to extend output to 70A
Click here for details
Capacitance
Range : 1nF to 100uF
Best 1 Year Accuracy : ±0.2% of setting
compatibility with all bridges / meters
Range : 1mH to 10H
Best 1 Year Accuracy : ±0.5% of setting
compatibility with all bridges / meters
Thermocouple
Source*
Range : -210°C to 1800°C
Best 1 Year Accuracy : ±0.04°C of setting
Additional types available using
Virtual Front Panel Software
PRT (RTD)
Source*
Range : -100°C TO 800°C (PT100)
Best 1 Year Accuracy : ±0.01% of setting
Virtual Front Panel Software
Range : 0.3W to 1MW
Phase Adjustment : 0 ± 180°
Frequency Range : 40 to 400Hz
Best 1 Year Accuracy : ±0.06% of setting
control the phase angle between
voltage and current waveforms.
Eliminate errors caused by
capacitive or inductive loads
Range : 0 to 359.9°
Best Resolution : 0.1°
Best Life Accuracy : 0.2°
Calibration*
Amplitude Range : 2mV to 50V / Div
Best 1 Year Accuracy : ±0.01% of setting
Timebase Range : 5s to 2ns / Div
Best 1 Year Accuracy : ±5ppm
Levelled Sweep Range : 5MHz to 600MHz
Best 1 Year Accuracy : 1db
50kHz Reference
Best 1 Year Accuracy (Frequency) : 30ppm
Best 1 Year Accuracy (Level) : 0.5%
Calibration*
Range : 240 to 60,000 RPM
Best 1 Year Accuracy : ±0.003%
Calibration*
Continuity Ohms Range : 1, 10 Ohm
Best 1 Year Accuracy : ±0.1% of setting
Insulation Ohms Range : 100k, 250k, 500k, 1M, 10M, 100M Ohm
Best 1 Year Accuracy : ±1% of setting
Insulation Voltage Range : 0 to 1000V
Best 1 Year Accuracy : ±5% of setting
Virtual Front Panel software (supplied)
or ProCal Calibration software
Only for use with a 2000 Series Calibrator
Calibration*
Voltage Range : 0 to 33V
Best 1 Year Accuracy : ±0.02% of setting
Current Range : 0 to 4A
Best 1 Year Accuracy : ±0.05% of setting
Virtual Front Panel software (supplied)
or ProCal Calibration software
Only for use with a 2000 Series Calibrator
Warm Up Time
Double the time since last used up to 20 minutes maximum
Standard Interface
RS232
Optional Interface
GPIB / USB
Temperature Performance
Storage : -5°C to +60°C
Operation : 0°C to +50°C
Calibration 18°C to 25°C
Specifications apply between 18°C and 25°C
Outside this range an allowance of 0.18 x 1 year specification per °C should be added
Relative Humidity
Operation <80% to 30°C, <70% to 40°C , <40% to 50°C
Storage : <95% (non-condensing)
Altitude
Operation : 3000m (10,00ft) Maximum
Transit : 12000m (40,000ft) Maximum
EMC & Safety
The calibrator line inlet plug must be earthed
See D.O.C. for full details
Low Analogue Isolation
100V
Line Power
Line voltage selectable : 110V / 230V
Line frequency : 50Hz to 60Hz
Line voltage variation : -6% +10%
Power Consumption
28 Watts (Standby)
Dimensions
Calibrator Only : 43cm x 46cm x 19mm
Calibrator in shipping box : 58cm x 56cm x 37cm
Calibrator in soft carry case : 49cm x 50cm x 19cm
Calibrator in hard transit case : 55cm x 56cm x 26cm
Weight
Calibrator Only : 12.5kg
Calibrator in shipping box : 15kg
Calibrator in soft carry case : 13.5
Calibrator in hard transit case : 22kg
* Denotes option
Due to continuous development specifications may be subject to change
