All options provide the calibration waveforms required for amplitude, timebase and bandwidth including gain and linearity of the horizontal and vertical deflection circuits. To minimise lead changing, the oscilloscope signals are output from a single BNC connector - for automated calibration and optional 4-channel test head adapter is available.
OPTION PWRSINE :: AC SINE / DC POWER CALIBRATION OPTION TO 1.5MW
The AC Sine / DC power calibration option provides cost effective calibration of power (Watts) and VA ranges on power meters and clamp meters. The power option provides both voltage and current outputs simultaneously (phantom load) with an adjustable phase relationship.
Any voltage up to 1025V can be set using the normal output ranges and specifications of the calibrator. Currents up to 30A are available from the output of the calibrator without the need for an external amplifier.
The power function is very easy to use - select 'power' from the soft key menu, connect the power meter to both the voltage and current terminals and enter the voltage, current and frequency. Phase angle can be adjusted using the softkeys with a resolution of 0.1°. Power output is automatically calculated and displayed in kW.
OPTION PWRDDS :: DIRECT DIGITAL SYNTHESIS POWER/HARMONICS CALIBRATION TO 1.5MW
The Direct Digital Synthesis (DDS) power option for the 3041 and 3010 calibrators extends the AC Sine / DC power function to provide generation of waveforms with harmonic content for calibrating power meters with power harmonics functions. This includes a set of five fixed waveforms, plus the ability to upload user defined waveforms from a PC allowing waveforms with custom harmonic content to be generated.
For dependable readings regardless of the measurement technique and the ultimate in performance, the 3000 series uses precision passive resistors and capacitors, with calibrated values for both 2 and 4 wire connections. Using passive standards also allows confident calibration of AC bridges and removes any difficulty with traceability.
For the 3010 and 3041 a simulated option is available for resistance values between cardinal points providing a continuous range from 10 Ohms to 10 MOhms, with decade capacitance points up to 10 mF.
By incorporating this useful option, the workload of the 3000 Series calibrators can be increased to support calibration of RLC (REsistance / Capacitance / Inductance) meters and bridges and also allows calibration of DMMs with inductance measurement ranges.
Incorporating 8 fixed values, including 19mH and 29mH values for '3' range meters this option allows testing of these types of meters at points which can verify their linearity at near full scale points.
The RTD/PRT option makes calibration of high accuracy resistance thermometers easy. Simply connect in place of the probe and compare the displayed value with the 3000 Series calibrator. As the calibrator used passive precision resistors, reliable readings are guaranteed regardless of the measurement technique used by the thermometer.
A superior thermocouple simulation option, using an external adapter. Temperature gradients / thermal EMFs which can be introduced by internally mounted thermocouple simulation methods are one of the greatest sources of error with thermocouple temperature calibration.
For the ultimate in accuracy, Transmille has designed a dedicated external adapter. This keeps the electronics required to generate the low level signals as close as possible to the measuring input of the thermometer. This also allows the signal to be as free as possible from electrical noise, and also eliminates errors caused by heat generated by surrounding electronics in the calibrator.
Direct simulation of 8 Thermocouple types CJC sensor built into the thermocouple plug -
Measures the CJC temperature at the closest point to the
cold junction.
Special care has been taken over the cold junction compensation - a common source of errors in thermocouple calibration. the cold junction compensation (CJC) sensor is mounted in the thermocouple plug itself. By measuring the cold junction at the instruments input allows any type of thermocouple to be simulated without using compensation cables.
Designed for the calibration of both wound AC and magnetic field hall effect AC/DC clamp meters the Transmille current coil offers several unique features built in a robust construction, complete with alignment table for ease of use.
Calibrates clamp meters up to 1500A (30A input) 2 / 10 / 50 Turn Coils High accuracy AC/DC balanced design Wide range of clamp sizes covered Includes alignment table for repeatable readings
Three coils in one provide the ability to calibrate a wide range of coils, from small lower clamps down to 10mm jaw diameter to larger current clamps.
A high current coil, based on the EA002, is designed for use with the EA3012 Transconductance amplifier. With a maximum input of 40A the Ea019 2 / 10 / 50 turn coil can provide up to 2000A simulated current for use with high current clamp meters.
Calibrates clamp meters up to 2000A (40A input) 2 / 10 / 50 Turn Coils High accuracy AC/DC balanced design Wide range of clamp sizes covered Includes alignment table for repeatable readings
Three coils in one provide the ability to calibrate a wide range of coils, from small lower clamps down to 10mm jaw diameter to larger current clamps.
Using a high intensity LED light source, optical tachometers can be calibrated quickly and easily. Simply enter the RPM value using the calibrator keypad or use ProCal software for automated calibration.
High intensity LED light source Direct keyboard input in RPM Range 60 to 60,000 RPM
OPTION EA008 :: pA / HIGH RESISTANCE MEASUREMENT ADAPTER
The high resistance / pA measurement adapter eliminates the need for a separate electrometer instrument. The low cost EA008 provides 5 current measurement ranges down to 10nA with a resolution of 1pA and incorporates a 'virtual ground' input., avoiding errors due to input impedance.
Accurate current measurement down to pico amp levels Ideal for high value resistance measurement to 1 TOhm Five range from 10nA to 100uA Supplied with Virtual Front Panel software
Provide accurate calibration of sensitive electrometers and low level pico amp meters safely and quickly with this purpose designed option.
A unique and ingenious circuit designed to convert the accurate voltage output from the calibrator into low noise precision current without the use of destructive high voltages and unstable high resistors often used.
Ideal for calibrating electrometers Source accurate current down to pA levels Low open circuit compliance voltage Safe to use on sensitive input circuits Supplied with VFP software
By connecting a torque calibration adapter to the 3000 Series calibrator, torque calibration can be performed. Housing an external torque transducer allow torque screwdrivers up to 20Nm to be calibrated.
Accuracy 0.2% Supports multiple units eg. Nm, ftlb etc.
OPTION EA015 :: MULTI FUNCTION WORKSTATION ADAPTER
The multi function workstation adapter provides a central work area with all the connections routed conveniently to remote terminals mounted at the front of the adapter. The adapter extends the functionality of the calibrator to include :
2 / 10 / 50 Turn Clamp Coil Insulation Resistance Calibration Continuity Resistance Calibration Insulation Test Voltage Measurement Continuity Current Measurement Optical Tachometer Calibration Thermocouple Simulation Voltage Measurement to 30V Current Measurement to 30mA Calibrator Output Routing (to Workstation Front Panel)
OPTION EA017 :: 4 CHANNEL OSCILLOSCOPE TEST HEAD ADAPTER
For automation of oscilloscope calibration, a 4 channel switching test head is available. Connect to the 3000 series adapter interface and select the channel required. For accurate calibration of 50 Ohm input oscilloscopes up to 1V/Div a low impedance buffered amplitude output can be selected.
4 Channels Direct / Buffered (Typically 0.5 Ohm) Output
OPTION EA3012 :: 100A DC / 70A AC TRANSCONDUCTANCE AMPLIFIER
The EA3012 is a powerful linear transconductance amplifier designed exclusively for use with the 3000 Series calibrators which provides a cost effective solution to calibrating high current instruments.
Connecting to the 3000 Series adapter interface, the EA3013 extends the output current range to 100A DC / 75A AC - higher currents are available by paralleling EA3012 amplifiers as required to give the current output needed.
100A DC / 75A AC Stackable for higher currents Low noise linear MOSFET technology Controlled using ProCal or Virtual Front Panel software Ideal for calibrating high current shunts / meters
OPTION EA3023 :: 3A / 63V POWER SUPPLY CALIBRATION ADAPTER
An essential option for simplifying calibration of power supplies, the EA3023 can measure the output voltage and also provide an electronic current load allowing voltage, current and even output resistance to be calibrated using a single compact adapter.
Connecting to the 3000 Series adapter interface, the EA3023 is controlled using either ProCal or the supplied Virtual Front Panel software.
Measures voltage up to 63V Active current load to 3A Measures output resistance (using VFP software)
OPTION EA3024 :: 10kV DC 5kV AC KILOVOLT AMPLIFIER
The EA3024 kilovolt amplifier provides the solution to the calibration of high voltage probes and dividers. the amplifier/calibrator combination is used with Virtual Front Panel software to control outputs up to 10kV DC and 5kV AC.
1kV to 10kV DC 1kV to 5kV AC Operated using ProCal or Virtual Front Panel software
OPTION EA3025 :: 60A / 100V POWER SUPPLY CALIBRATION ADAPTER
The EA3035 provides an easy to use solution for the calibration of high current power supplies, overcoming many of the problems normally associated with measuring high current outputs.
Key Advantages :
Accurate, stable electronic load regardless of power supply output voltage and lead connection resistance. Removes the need for specific value high power resistors Allows automation for more efficient calibration
Features :
Voltage measurement to 100V Active current load to 60A Output resistance measurement Applications include battery & UPS testing Operated using ProCal or Virtual Front Panel software
The 3000 Series supports pressure calibration using a range of pressure modules which connect directly to the calibrator. The pressure modules cover a wide range - an optional hand pressure pump is available as an option to generate pneumatic pressure up to 60Bar and vacuum to -0.95Bar.
Operated using ProCal or Virtual Front Panel software Accuracy to 0.04% Optional hand pressure pump
Designed for carrying the 3000 Series calibrators when working on-site, the soft carry case includes side pockets, a large top pocket and carry strap. The lightweight construction of the calibrator allows easy carrying of the unit.
Designed for transporting the 3000 Series calibrators this rugged transit case is suitable for shipping the 300 Series as well as protecting the calibrators in particularly harsh environments such as oil rigs. The hard wearing design includes extra corner protection.
A comprehensive set of test leads and adapters is provided in this option lead set to cover requirements from low level DC through to high current and high resistance measurements.
The leads and materials supplied in this measurement set have been carefully selected to minimise connection / lead errors. The safety of the lead set is ensured by the use of non-retractable shrouded connectors for the voltage lead set.
Transmille Ltd. Unit 4, Select Business
Centre, Lodge Road, Staplehurst, Kent TN12 0QW, United Kingdom Telephone +44(0)1580 890700 Facsimile
+44(0)1580 890711 Emailsales@transmille.com Transmille 2000-2004. All Rights Reserved
250MHz (SCP250) : 3050