Three options are available for the 3000 Series calibrators which are suitable for calibration of both analogue and digital storage oscilloscopes :
250MHz (SCP250) : 3050
All options provide the calibration waveforms required for amplitude, timebase and bandwidth including gain and linearity of the horizontal and vertical deflection circuits. To minimise lead changing, the oscilloscope signals are output from a single BNC connector - for automated calibration and optional 4-channel test head adapter is available.
OPTION PWRSINE :: AC SINE / DC POWER CALIBRATION OPTION TO 1.5MW
The AC Sine / DC power calibration option provides cost effective calibration of power (Watts) and VA ranges on power meters and clamp meters. The power option provides both voltage and current outputs simultaneously (phantom load) with an adjustable phase relationship.
Any voltage up to 1025V can be set using the normal output ranges and specifications of the calibrator. Currents up to 30A are available from the output of the calibrator without the need for an external amplifier.
The power function is very easy to use - select 'power' from the soft key menu, connect the power meter to both the voltage and current terminals and enter the voltage, current and frequency. Phase angle can be adjusted using the softkeys with a resolution of 0.1°. Power output is automatically calculated and displayed in kW.
Designed for the calibration of both wound AC and magnetic field hall effect AC/DC clamp meters the Transmille current coil offers several unique features built in a robust construction, complete with alignment table for ease of use.
Calibrates clamp meters up to 1500A (30A input) 2 / 10 / 50 Turn Coils High accuracy AC/DC balanced design Wide range of clamp sizes covered Includes alignment table for repeatable readings
Three coils in one provide the ability to calibrate a wide range of coils, from small lower clamps down to 10mm jaw diameter to larger current clamps.
Designed for carrying the 3000 Series calibrators when working on-site, the soft carry case includes side pockets, a large top pocket and carry strap. The lightweight construction of the calibrator allows easy carrying of the unit.
Designed for transporting the 3000 Series calibrators this rugged transit case is suitable for shipping the 300 Series as well as protecting the calibrators in particularly harsh environments such as oil rigs. The hard wearing design includes extra corner protection.
A comprehensive set of test leads and adapters is provided in this option lead set to cover requirements from low level DC through to high current and high resistance measurements.
The leads and materials supplied in this measurement set have been carefully selected to minimise connection / lead errors. The safety of the lead set is ensured by the use of non-retractable shrouded connectors for the voltage lead set.
Transmille Ltd. Unit 4, Select Business
Centre, Lodge Road, Staplehurst, Kent TN12 0QW, United Kingdom Telephone +44(0)1580 890700 Facsimile
+44(0)1580 890711 Emailsales@transmille.com Transmille 2000-2004. All Rights Reserved
250MHz (SCP250) : 3050